Wayne-Dalton TELEPORT WDHC-20 Manual do Utilizador Página 27
- Página / 70
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
27
Z-Wave
®
Network Reset clears all Z-Wave
®
node and
network information from Teleport™.
1. Press the HOME key on Teleport™.
2. Press and hold SETUP until the HOME red LED blinks
twice.
3. Enter 969 on the numeric keypad. The HOME red LED
blinks continuously.
The HOME green LED blinks twice to indicate a successful
operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
Z-WAVE
®
NETWORK RESET
Network re-discovery is used to make your Z-Wave
®
network more efficient and improve performance if, for
example, a Z-Wave
®
plug-in module was moved across
the room.
NOTE: This operation requires Teleport™ to be the
primary controller.
CAUTION: This operation may take several minutes
depending on the size of your network.
1. On Teleport™, press the HOME key.
2. Press and hold SETUP until the HOME red LED blinks
twice.
3. Enter 961 on the numeric keypad. The HOME red LED
blinks continuously.
The HOME green LED blinks twice to indicate a successful
operation.
NOTE: If the HOME red LED emits one long, steady blink,
the operation was not successful; repeat the sequence.
Z-WAVE
®
NETWORK RE-DISCOVERY
- TELEPORT ™ 1
- enabled 1
- Universal A/V Remote Control 1
- User Manual 1
- TABLE OF CONTENTS 2
- INTRODUCTION 4
- FEATURES AND FUNCTIONS 5
- Key Charts 6
- INSTALLING BATTERIES 8
- Device Mode Table 8
- SETTING UP A COMBO UNIT 11
- SEARCHING FOR YOUR CODE 12
- REVEALING DEVICE CODES 13
- LEARNING FEATURE 13
- Continued next page 14
- CHANGING VOLUME LOCK 16
- MACRO KEY BASICS 18
- CREATING A Z-WAVE 20
- NETWORK 20
- SETTING UP Z-WAVE 22
- ACTIVATING Z-WAVE 23
- ONLY TO A SECONDARY REMOTE 25
- PRIMARY CONTROLLER SHIFT 25
- RECEIVE CONTROLLER COPY 26
- NETWORK RESET 27
- NETWORK RE-DISCOVERY 27
- REMOVING A FAILED 28
- NODE FROM 28
- THE NETWORK 28
- CLEARING CUSTOM PROGRAMMING 28
- TROUBLESHOOTING 29
- FCC NOTICE 30
- ADDITIONAL INFORMATION 30
- MANUFACTURER’S CODES 31
- 30670, 30738, 30801, 31074 33
- 00476, 00810, 00276, 00003 35
- 01877, 00877, 00144, 00533 35
- Setup Codes for CD Players 36
- Setup Codes for DBS 37
- Setup Codes for DVD Players 38
- 20778, 21086, 21107, 21177 39
- 21024, 21117, 21129, 21502 39
- 20591, 20675, 20821, 21268 39
- 21073, 21077, 21158, 21194 39
- Controlled by the DVD 42
- Controlled by the VCR 42
- 30597, 30318, 31239, 31597 43
- 01505, 01005, 00775, 01775 44
- 00566, 00855, 00143, 01392 44
- 01142, 01442, 01443, 01444 45
- 00749, 01749, 00790, 01285 45
- Setup Codes for TVs 47
- 11080, 11178, 11264, 11403 48
- 10812, 10171, 11944, 11963 48
- 10179, 10683, 10809, 10853 49
- 10178, 10030, 10032, 11926 49
- 11517, 11564, 11963, 12002 49
- 10053, 10731, 11253, 11923 50
- 10180, 10030, 10039, 10280 50
- 10854, 10855, 11154, 11398 50
- 11365, 11589, 11590, 11591 51
- 10865, 10870, 10871, 10872 53
- 10180, 10171, 11904, 11944 53
- 11578, 11627, 11640, 11755 54
- Setup Codes for TVs (DLP) 55
- Setup Codes for TVs (LCD) 55
- 11204, 11517, 11564, 12002 56
- 10802, 11198, 11365, 11990 56
- 11144, 11240, 11331, 11610 56
- 10878, 11217, 11360, 11599 56
- 10171, 11271, 11314, 11394 56
- Setup Codes for TVs (Plasma) 57
- 10865, 11276, 11327, 11328 58
- Setup Codes for TV/DVD Combos 59
- Controlled by the TV 61
- 20240, 20807, 21035, 21060 62
- 20162, 20593, 21162, 21262 62
- 20162, 21035, 21162, 21262 62
- Setup Codes for VCRs 63
- 20042, 20038, 21035, 21237 65
- 20035, 20162, 21035, 21162 65
- 20000, 20042, 20072, 20149 67
- Printed in China 70
- 0002992 Rev A 70
York YZB018 THRU 060 manuals
Owner’s manuals and user’s guides for Conditioners York YZB018 THRU 060.
We providing 1 pdf manuals York YZB018 THRU 060 for download free by document types: User Manual
Comentários a estes Manuais